Timken T95 T95W Thrust Tapered Roller Bearings

Housing Material:[Aluminum Alloy] 201; Type:Bearings with Housin; Shape:Flange Type; Width T(mm):25; Volume Discount:Available; Bearing Material:Stainless Steel; Bearing Retained:No; Seals:ZZ (Double Shield); Number of Bearings:Double; Bearing Retained:No;

Aa - Cage-Cone Backface Clearance:0.5 mm; Cg - Geometry Factor:0.0853; Cup Part Number:YKA32010X; C1 - Dynamic Radial Rating (1 million revolutions)5:82700 N; C - Cup Width:21.500 mm; da - Cone Frontface Backing Diameter:55.88 mm; G2 - Heat Generation Factor (Rib-Roller End):20.3; r - Cup Backface T

I.D.(Ø):45; Symbols of Lubrication Amount:No; Symbol of contact angle:No; Material Symbol:No; Rolling Element Material:Steel; Material Symbol:No; Rolling Element Material:Steel; Width(mm):25; Outer Ring Type:Flat; Precision (JIS):Grade 0;

Da - Outer Ring Backing Diameter:97.719 mm; Ce - Dynamic Radial Rating1:75600 N; Ball Type:STEEL; da - Inner Ring Backing Diameter:96.403 mm; Design Units:METRIC; Contact Angle:60 º; R - Inner Ring To Clear Radius2:1.0 mm; do - Ball Diameter:12.700 mm; D:120 mm; Bearing Weight:1.140 Kg;

Material:Steel; Type:Lock Nut; Screw Type:Metric (fine) Thread; Screw Type:Metric (fine) Thread; Surface Treatment:No Surface Treatment; Shape:Round shape; Shape:Round shape; Surface Treatment:No Surface Treatment; Thread Nominal M(mm):TM360x5; Days to Ship:9 Days;

Recommended tightening torque for set screw:3.7 Nm; A1:12 mm; Weight:0.74 kg; C:19.5 kN; L:80 mm; e:19 mm; T min.:-20 °C; s1:15 mm; N:11,5mm; A2:41 mm;

B:49.2 mm; s1:24.6 mm; Designation of bearing:UC209-27G2L4; N:M12; L1:40 mm; Weight:2.22 kg; G:M6x1; C:31.85 kN; T min.:-20 °C; J:85 mm;

A5:18.2 mm; T max.:100 °C; d:31.75 mm; C:19.5 kN; SW:3.97 mm; A:27 mm; Weight:0.88 kg; A3:1.5 mm; Designation of housing:C206-; S:18.2 mm;

Flange Shape:Compact Type; Days to Ship:7 Days; Bearing Material:[Steel] Steel; Bearing Part Number:6900; RoHS:6; Holder Surface Treatment:Clear Anodize; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Retained:No;

Housing Style:Cartridge; Dimension R:0.21 in; Shaft Size  :6-1/2 in; Y1 - Geometry Factor:2.08; Dimension L Fix:8.64 in; Oil Lubrication - B/C/O Seal:350 rpm; Dimension C:9.25 in; Dimension B:1.50 in; Dimension F:13.563 in; Oil Lubrication - T Seal:900 rpm;

Holder Surface Treatment:Electroless Nickel P; RoHS:6; Flange Shape:Compact Type; Seals:ZZ (Double Shield); Seals:ZZ (Double Shield); Bearing Used:Deep Groove Ball Bea; Volume Discount:Available; Volume Discount:Available; Shape:Flange Type; Bearing Used:Deep Groove Ball Bea;

Type:Ball; Size Standards:Metric System; Basic Dynamic Load Rating(N):2700; Retainer Type:Punching; Load Direction:Radial; Inner/Outer Ring Material:Steel; Max. Allowed rpm(rpm):30000; Precision:Grade 0; B:6; Type:Ball;

Grease Lubrication - M/N Seal:700 rpm; Float:0.083 in; Dimension L Fix:6.03 in; Shaft Size Type:Imperial; Housing Style:Piloted Flange Cartr; Locking Style:Double Concentric; Grease Lubrication - B/C/O Seal:400 rpm; Y2 - Geometry Factor:3.90; Bearing Number:22226; Eng Internal Radial Clearance - Max

RoHS:6; Width T(mm):25 ～ 50; Bearing Part Number:608; Number of Bearings:Double; Bearing I.D. d(mm):8; Shape:Flange Type; Bearing Retained:Yes (with retaining; Number of Bearings:Double; Flange Shape:Round Type; Bearing Retained:Yes (with retaining;

T(mm):25 ～ 50; Shape:Bottom Mount; Number of Bearings:Double; Bearing Retained:No; Type:Bearings with Housin; Shape:Bottom Mount; Bearing Part Number:6903; Seals:VV (Non-Contact Rubb; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin;